Novitec Powerjet 4 - Additional ECU For Fiat 124 Spider

Novitec Powerjet 4 for Fiat 124 Spider (348)
Easy to install using plug&drive technology. Anybody can mount or dismount the Powerjet 3 within 10-30 minutes.
There are 3 plugs of the engine's original wiring harness which have to be connected to the Y-cables of the wiring harness on the additional ECU. In addition, the Powerjet 4 has to be connected to the car's battery.

The Powerjet 4 reads the sensor data with multichannel-technology, modifies it, and sends it to the original ECU without changing the original characteristic diagramme.
We recommend to use fuel with 98 or 100 octane (Super Plus, high octane, Ultimate, VPower etc). This is basicly not needed, but is useful if you want to have the full power. We also recommend a sport airfilter and a Ragazzon sport exhaust system.

Performance:

• 124 Spider 1.4 Turbo Multiair with 140 bhp / 240 Nm: 179 bhp / 273 Nm

Attention
Please note that every chip tuning will increase engine wear to a small degree. Chip tuning uses the reserve capacity that Fiat has programmed into the original ECU of the 0.9 TwinAir engine.

Money Back Warranty:
Order now, plug the Powerjet 3 into your car, have fun and if you don't like it, you can return it without any problems, and with a full money refund.

ATTENTION! High addiction risk! You'll never want to send it back ;)

The bypass plug, which is available as an optional item, can be connected to the Powerjet's cable harness instead of the black ECU box. It allows you to drive your Fiat with the factory set-up without removing the Powerjet's cable harness from the engine.